POST GRADUATE COURSE ON 'SPECIFICATION ENGINEERING'
ELIGIBILITY FOR THE COURSE : ANY DIPLOMA OR DEGREE CHEMICAL ,MECHANICAL OR PRODUCTION ENGINEER WHO IS AMBITIOUS & WOULD LIKE TO MAKE CAREER IN CHEMICAL PLANT DESIGN (IN DETAIL ENGG.) WITH REPUTED MULTINATIONAL COMPANIES
1.  COURSE SYLLABUS OVERVIEW
2.  A KEY ROLE OF SPECIFICATIONS & MTO GROUP IN PROCUREMENT OF PIPING ITEMS
3.  DETAILED EXPLANATION ON EACH DOCUMENT PRODUCED BY SPEC GROUP
4.  CASE STUDY FOR EACH DOCUMENT
5.  DESIGN CALCULATIONS INVOLVED IN PREPARING SPECIFICATIONS
6.  VARIOUS DOCUMENTS ISSUED BY SPEC GROUP ARE AS FOLLOWS :
  • PIPING SPECIFICATIONS
  • VALVE SPECIFICATIONS
  • SPECIAL ITEMS SPECIFICATIONS
  • TECHNICAL RECOMMENDATION FOR VALVES & SPECIAL ITEMS
  • VENDOR DRAWING REVIEWS FOR VALVES & SPECIAL ITEMS
  • ISSUING MATERIAL REQUISITIONS FOR VALVES & SM ITEMS
  • ORDER SPECIFICATIONS
7.  VALVE MTO
8.  DIFF STAGES OF MTO : BULK,INTERMEDIATE & FINAL
9.  DESIGN BASIS FOR PIPING
10.  GENERAL NOTES ON PIPING SPECIFICATIONS
11.  FAMILIARITY WITH CODES & STANDARDS
12.  ORIENTATION ABOUT P&ID
NOTE : DESIGN CALCULATIONS INVOLVED :
1.  PIPE WALL THK CALC FOR INTERNAL PRESSURE
2.  PIPE WALL THK CALC FOR EXTERNAL PRESSURE (VACUUM)
3.  PIPE WALL THK CALC FOR PIPELINES UNDER IBR
4.  MITER WALL THK CALC FOR 90 & 45 DEG MITER BEND
5.  BRANCH REINFORCEMENT CALCULATIONS
ADDITIONAL TOPIC : KNOWLEDGE ABOUT MATERIALS
NOTE : TIMINGS WILL BE SET ON MUTUAL CONVINIENCE & THE TOTAL COURSE DURATION IS APPROX. 80 HOURS
Home  |  About Us  |  service  |  Feedback  |  Contact Us
© 2009 Concept Development Centre, Pune (India)   Site Designed by Samarth Design